Discussion of Principles of Structural Analysis and Design problems in preparation for Civil Engineering Licensure Examination.
Curated by: Engr. Harf Miranda (Sir Harf Engineering Tutorial) (125 videos)
Check out our Review Center: https://www.facebook.com/share/1AC24Wsb9v/?mibextid=wwXIfr SITUATION: A pipe carrying steam at 3.5 MPa has an outside diameter of 450 mm and a wall thickness of 10 mm as shown in Figure UT09. A gasket is inserted between the flange at one end of the pipe and a flat plate used to cap the end. 1. Calculate the required force to hold the cap on. A. 508.270 kN C. 556.650 kN B. 532.185 kN D. 596.325 kN 2. How many 40 mm diameter bolts must be used to hold the cap on if the allowable stress in the bolts is 80 MPa, of which 55 MPa is the initial stress? A. 16 C. 18 B. 17 D. 19 3. What circumferential stress is developed in the pipe? A. 37.625 MPa C. 75.25 MPa B. 36.75 MPa D. 73.5 MPa Thanks for watching! Comment for questions and suggestions for future lecture in this series. Subscribe and hit the bell button to be notified for future posts. #civilengineering #boardexam #engineering #structuralanalysis #structuralengineering #CivilEngineeringLicensureExamination #PRC #PSAD #theoryofstructures #cele #strengthofmaterials #mechanicsofmaterials #staticsofrigidbodies #steeldesign #compressionmember #trusses #friction #refresher #PSADRefresher #SHET